In regards to the Replacement Swivel Collar for Roadmaster Tow Bars part # RM-9200-6, the diameter of the pin used to secure the collar to the base plate kit is 3/4" diameter and the width of the collar here it attaches to the base plate kit is 2-1/8". The distance between the two tabs which attach to the tow bar end are 1-9/16". I went out to our warehouse to measure these for you.
I have attached a photo below of these dimensions as well. view full answer...
Let's begin with a hitch and trailer wiring for towing your RV with the Jeep Grand Cherokee. For a hitch, I'd recommend the Curt Class III hitch, part # C13182. You'll also need a ball mount and a trailer ball, provided in the # 989900 etrailer ball mount kit.
For a brake controller, I'd go with the Curt # C51180 Echo Wireless Brake controller. The Echo will communicate wirelessly with your smart phone, which you'll use to control the braking action of the trailer.
For a vehicle equipped... view full answer...
The Rhino-Rack RVP Roof Rack # RRRVP27, which is confirmed to fit your 2020 Jeep Grand Cherokee, has a weight capacity of 149lbs. You will want to check your owner's manual to verify your roof's weight capacity, but my research tells me that your roof has a 150lb weight limit so you should have no issue mounting a kayak that weighs 80lbs. This roof rack is very easy to install or remove; once the legs are installed, there is just one bolt on each side of the crossbar to secure it to the... view full answer...
If you look at the 10 minute mark of the attached video you'll see Shane took the wiring bracket that came with the etrailer Invisible Base Plate Kit # e98950 and bolted it to the bumper beam. Once you have it attached you'll just have to cut the fascia to allow for the wiring from your RV to plug into your vehicle. view full answer...
The Curt # C62VR taillight converter/4 pole trailer wiring harness you'd looked at would work perfectly for you. The harness would install as shown in the linked installation video, and you'd need to run one wire up to the battery, which is also explained in the video.
If you'd prefer an actual mounting bracket for the trailer connector, instead of using the trailer connector's dust cover to attach it to the safety chain loop as shown in the video, you can assemble a bracket using a no-drill... view full answer...
It looks like you installed the 7- and 4-Pole Trailer Connector Socket # HM40975 on your 2013 Jeep Grand Cherokee. I'm assuming you had the connector already at the back, and they needed to turn on the power to it like you said.
It sounds like a lot of things were checked already but I would check that factory connector you plugged into the # HM40975. Using a circuit tester like the # PTW2993, check to see if you have power at the connector. Also, go ahead and make sure there is no dirt... view full answer...
If your 2018 Jeep Grand Cherokee has the black and chrome track, flush mounted rails that run front to back (see attached) then you will be able to reuse the Rapid Podium Feet # TH460R that you currently have with the Fit Kit # THKIT3142.
According to Thule though your 47" AeroBlade crossbars are too short and you'll need at least the 53" crossbars. These are now available as the WingBar Evo and we have them in Black # TH711420 as well as Silver # TH711400.
If you don't have the black... view full answer...
Your trailer wheels should not actually lock up. This is a common misunderstanding because locking the tires actually reduces traction and can cause more issues with your trailer tracking behind your vehicle. You do want your brakes to slow you as quickly as possible but you don't want them to lock up.
With the Prodigy P2 # 90885, the adjustment knob set to the max level is going to deliver the most power, but you want to also make sure you have the boost settings set to the max for... view full answer...
Absolutely!
What you're looking for is the T-One Vehicle Wiring Harness # 118727 which you can then pair with the Universal Wiring Harness # ETBC7 to get you a fully-functional 7-Way connector at the back of your 2017 Jeep Grand Cherokee.
I also recommend picking up the No-Drill Mount Bracket # 18136 so you have a nice clean way to secure the 7-Way to your Jeep.
I've linked installation videos of the T-One and ETBC7 wiring kits for you to check out. view full answer...
When trailer lights are malfunctioning, there are many possible causes. As a first step, you will want to use a circuit tester such as part # PTW2993 and test the trailer connector on your Grand Cherokee. This will help you determine if the problem exists with the trailer or with the vehicle. Test each pin as its function is activated. If you are not getting current at the right or left turn/brake light pins, you will want to check the tow package fuses if your Grand Cherokee was equipped... view full answer...
Towing mirrors are not necessarily required on your 2016 Jeep Grand Cherokee to tow a trailer in Washington State. The only requirement is that your vehicle has mirrors on both sides and that you can see 200' back.
Since mentioned that you can see the required 200' back you are all good and do not have anything to worry about.
If you would rather add towing mirrors so you are no doubt good then I recommend the K-Source Universal Dual Lens Towing Mirrors # KS3990 which attach to your factory... view full answer...
In order to use a Blue Ox Tow Bar with the Roadmaster Cross Style Base Plate Kit you'll also need the Blue Ox Tow Bar to Roadmaster Standard, EZ and XL Base Plates Adapter part # BX88178. view full answer...
We can get your 2012 Jeep Grand Cherokee hooked up with a Thule cargo box that will be able to accommodate your longer skis. In regards to hatch clearance, I did check the clearances for every cargo box, and with your measurement of 48 inches, there isn't an option that will allow you to fully open the hatch with the cargo box on due to the length needed for your skis.
So what you will need to carry your skis is one of the Alpine line of boxes, which are designed for longer skis like... view full answer...
Since you have the StowMaster Tow Bar # RM-501 you will need the Roadmaster Crossbar-Style Base Plate # RM-521440-4 for your 2014 Jeep Grand Cherokee. Since you do not have the vehicle side brackets you will also need the Roadmaster Tow Bar Quick Disconnect Brackets # RM-222 to make everything connect.
Depending on what all parts you already have we do also have the Wiring Kit # RM-15267 to wire in your tail lights to function off the motorhome and the Braking System # HM39524. If you... view full answer...
I confirmed with Aries that the Aries Oval Nerf Bars - 4" Wide - Polished Stainless Steel # AAS221008-2 will in fact fit your 2018 Jeep Grand Cherokee Overland Edition. This is a really nice kit which offers a simple bolt-in installation process, requiring no drilling. view full answer...
The trailer hitch I recommend for a 2019 Jeep Grand Cherokee is the etrailer Trailer Hitch Receiver part # e98901. This hitch is a direct bolt-on fit with no cutting or drilling required. It installs under the rear bumper. There are no options which install behind the cutout unfortunately. Then for the wiring, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118727 which does not require any splicing and provides a 4-way flat connector. view full answer...
I am happy to inform you that the Superchips TrailDash TD2 Performance Tuner, part # SU42050, is a confirmed fit for your 2001 Jeep Grand Cherokee with 4.7L V8 Engine.
This tuner will improve your fuel economy with the Mileage Coach app and has a crawl tune for off-roading. view full answer...
Yes, the cargo mats from a 2018 and 2019 Jeep Grand Cherokee are the same size. The WeatherTech mat part # WT40469 that you mentioned fits both year vehicles. It was also carried over to the 2020 models as well.
I attached a review video for this mat for you to check out as well. view full answer...
For your 2019 Jeep Grand Cherokee with Quadralift suspension I have a solution that will help with rear suspension sag similar to air bags if you plan on towing a trailer but none of the air bag kits we offer are a fit for the models with the Quadralift suspension.
So instead your best option is a weight distribution system. These kits reduce the rear sag like an air bag kit but what makes them superior to air bags is that they also improve handling and braking due to redistributing some... view full answer...
The Roadmaster Sterling tow bar part # RM-576 requires the use of Direct Connect base plate kits so for your 2017 Jeep Grand Cherokee the Roadmaster base plate you'd need is the # RM-521440-5 instead as the kit you mentioned requires a crossbar. view full answer...
Go To Results